Finished Case Design with minor tweaks, Added 3d Models & Made a full Easypad CAD–––––––––––––––– —————— —————————————— The case design is now finished with a usb cutout on the side, and I added the pcb (along with all the other components) onto the cad so there is now a full cad of the easypad. I also attached the 3d models to the footprints in kicad to get a full render of the pcb with all the components. I also took a while to work on the code for the easypad, for which I used qmk firmware. I currently have it set in the code for wasd, 1, 2, 3, escape, enter, put the pc in sleep, power, and shut it down. Once I have it built I also want to try and get a button that launches straight into steam big picture mode. The encoder is set to control volume, and the OLED displays the status of cap, numlock, and the current layout. After building it, I also want to change this to do something cooler but this code was pretty hard to understand for me so I’m going to keep this code for now. As for the easypad, once I’ve setup a github I think this should be ready to ship!