Finished Github repo

Finished design
Added github repo and finished it with a BoM and a contributions.md

worked on circuit drawing for my readme

Did research on how to wire the thermostat
added items to my BoM

added items include:
Cartridge Heater 12V 40W 6 x 20mm for heating
W1209 Thermostat for controlling and montoring temp
12v DC 4A power supply for controlling the thermostat and cartridge heater.

worked on hinges
Hinges now work with clearing
Tried to find a clear material with a high temp resistance but couldnt so the top lid (or Top Shell) will be white as well as the bottom (Bottom Shell)

The material I will use is 1172 pro nylon.
179 degrees celc resistance
good toughness
high print quality

Research and BoM

Short: created my BoM (bill of materials) and researched modules to measure humidity+heat.

Main boards are Xiao boards and for the heatmat a Reptile heat mat I have laying around from my ant colonies

The designing process.
I worked on a 3d design using onshape, I found a model of a 1:1 scale of the bambu lab resuable spool and used that to design the dryer with.
I went for a simple design but added features that the other ones you see online dont.

The design on paper is a sketch so I had something to fall back on when I didnt know how I was going to shape the shell of the dryer.

The 3d model at the moment is a full 1:1 scale