This battery is not human bro.

---

This took me way too long to make, the most problematic part was to figure out how to get all the cells together without exploding the pack with extreme heat.

---

I didnt have a spot welder, all i had was nickel strips some cells and a dream, so i used my regular soldering iron and started experimenting on how to solder these packs

---

In the end i found that “spot soldering” worked best for me, i hope im the first one who invented this, but u basically take not that hot of a soldering iron, and then u sand the surface place the strip and dab the soldering iron on the connection to join them together, do this like 4 times for a single joint and u have quiet solid joints

---

While making the connections i did mess up and bit and there was some sparking not enough to burn my house thankfully

---

About the pack, its a 4s4p pack, my first time using 4s configuration, and i am NOT comfortable with the amount of power it delivers, its way too scary gng
Im gonna lock the throttle at 70% cuz i know damm well shit can go wrong real fast with these packs.

---

I did some test runs with this on my flying wing and this rc plane, using the pixhawk power module at 50% throttle i saw 11A consumption with PLENTY of power, and on my 3s lipo pack it consumed 21A at 100% so we can safely say its not bottlenecking.

---

Its currently 12000mah, i do have 4 more cells i bought so i can push it to 15000, but ill prolyy do it later cuz this scares me way too much

---

Im not kidding the sound the motor makes while using this pack is way too wild, i HOPE autopilot can handle everything n nothing goes wrong, that being said i will NOT do the maiden with this, instead ill use my 1500mah 3s lipo for that.