@zmalkani

Spent about 10 hours on EasyEDA (unrecorded time) making the PCB for this project. This recorded time was spent writing the first few basic commands for the Serial CLI, allowing the user to ping each node, check task status of nodes, and blink each node. Still waiting for PCB and parts to arrive so will likely be some more time before i get to test this. Although it worked on wokwi before wokwi stopped working for me.

Improved the tx modules sample rate by a lot. Removed some excess tasks from it and it runs significantly faster now and the online viewer has far denser data. Also made new waterproof (not yet submersible or floatable) TX case with power button still. Super hyped.

Spent about 10 hours on EasyEDA (unrecorded time) making the PCB for this project. This recorded time was spent writing the first few basic commands for the Serial CLI, allowing the user to ping each node, check task status of nodes, and blink each node. Still waiting for PCB and parts to arrive so will likely be some more time before i get to test this. Although it worked on wokwi before wokwi stopped working for me.

Began making my rowing telemetry system’s app

Struggling for sure, relatively unsuccessful session with copilot on vs code just now. Tomorrow I am going to get back to it with a fresh mind and try to do it myself so I can understand it better. All roads seem to lead back to not using AI pretty consistently for me. Not a bad thing I suppose.

Photo below is of the RX and TX units. The TX with the large antenna is fixed inside the boat, tracks acceleration and transmits it over LoRa with a unique device ID to the RX unit (white), which receives the data and will (soon) send it to the app via BLE and display the data live on the app so a coach can help their athletes improve their technique.

Began making my rowing telemetry system’s app

Struggling for sure, relatively unsuccessful session with copilot on vs code just now. Tomorrow I am going to get back to it with a fresh mind and try to do it myself so I can understand it better. All roads seem to lead back to not using AI pretty consistently for me. Not a bad thing I suppose.

Photo below is of the RX and TX units. The TX with the large antenna is fixed inside the boat, tracks acceleration and transmits it over LoRa with a unique device ID to the RX unit (white), which receives the data and will (soon) send it to the app via BLE and display the data live on the app so a coach can help their athletes improve their technique.

More work on telem. system. Added device ID to the transmitting packets. Next step will be to start on the app i think.

More work on telem. system. Added device ID to the transmitting packets. Next step will be to start on the app i think.

I finished my fusion model for the case, as well as my PCB design for my hackpad. Uses 3 switches, an encoder, and an OLED.

I finished my fusion model for the case, as well as my PCB design for my hackpad. Uses 3 switches, an encoder, and an OLED.