Devlog 9

Just Designing more gasifier parts
This is very time consuming, but I promissed myself I have to finish it in order t get the project funded. I wont stop

Devlog 8

Yesterday’s work. Just defining some gasifier parts and fixing other chassis pipes. Today, Hope to finish all the gasifier and engine monting parts, so I can define the steering and suspension next weekend.

Devlog 7

I haven’t been posting for a couple of days.
Unfortunately, all the project files got corrupted, and I had tried everything in orde to recover them, but theres no result. I have to start again. Anyways, I know nothing will stop me.

i added the ball bearings that let the wheels turn and then i started working on the gearbox while fixing some design mistakes along the way, looking for how to get a 3d model of a bevel gear was a problem but that got solved quickly although putting them in place on the assembly was tough but when i went to add the axles that connect to the back wheels i noticed a fatal mistake i made is that i forgot that the wheels have to be on the same height yet i put the front wheels too high up or the back wheels too low down either way its going to be a hassle fixing it i wish i noticed it earlier

Devlog 6

Gasificator Parts

In order to get the project accepted, i must represent all the gasificator system. by now, im drawing a drum, a tin can, and downloading other from the web, like Tees and engines.

Devlog 5

steering, suspension and gasifier parts

Well today´s conclusion is that theres a lot of work left. Anyways I wont stop.

Devlog 5

steering, suspension and gasifier parts

Well today´s conclusion is that theres a lot of work left. Anyways I wont stop.

Chasis Re estructuration

Some of the pipes of my Kart had some trouble with the joints, and i had to fix it.
Im still investigatin the biomass generator and the integration to the stroke, in order to draw it better.
Next step: Just go on.
I wont stop till get this funded and then working
Thanks for read

Chassis in solid edge

Improving relationships and some pipes corner treatment. Also checking the floor pan in the back side to support the engine and gassifier.

You probably dont how much time you spend when youre learning this CAD programs but im sure one day i will be a pro on this. Thanks for reading

New Part and Relationships

The design is putting me a fight but I wont stop. Today I started designing the floortray and learning, using some tools to drill arround de border line of it, in order to use rivet to add it to the kart when I build it (someday haha).
Also experimented with some relationships betwen parts in an assembly. I have the doubt if should I relate faces or plans?? It is said that to relate plans is quite better, but is getting harder for me because sometime the round pipes of the chassis confuse, but I wont stop finding out
Thanks for reading

Solid Edge Relationships

Well, i havent noticed that i could record my time designing this chassis. I really spent all of Saturday, Sunday and monday, but i didnt record nothing. So silly I know haha.

I learned for a while some tipe of relationships on parametric designs in soldidedge, in order to enchance my assembly.