@samraat-756

A wind tunnel used to analyze drag force on different objects, like hotwheel cars, small model aircraft, or any geometry that fits! It will feature an on-off switch to turn it on or off, and a rotary dial to control the speed of the fan. It also will have a pressure cell load at the back to record and display real time drag force on an external monitor

A flight sim joystick inspired by the Airbus A320, for flight simming in MSFS2020! Powered by the Raspberry Pi Pico rp2040

A 65% keyboard featuring 2 rotary encoders and an LCD display!

This project is a pocket sized hardware diagnostic tool built around the Seeed Studio XIAO RP2040 to automatically identify and map external I2C devices. The tool pings the normal 7-bit address range (0x01 to 0x7F) on a common data bus and instantly finds any connected sensors or displays, reporting the hex addresses of those that are active on a serial interface. The board has standard 2.54mm pin headers that break out the microcontroller’s I2C lines along with power, ground and remaining GPIO pins, making a highly portable breakout and debugging rig for desktop hardware hacking/troubleshooting.

An aviation themed WebOS designed to convert your desktop into a digital cockpit!

Last updated 9 days ago

WebOS 2

An aviation orientated chatbot able to converse with you via slash commands 24/7, 365 days of the year!

Last updated 3 months ago

Make a Slack Bot

A custom 3x3 macro pad with dual rotary encoders for the inibuilds a350 cockpit camera views (msfs2020 & 2024), powered by a Seeed Studio XIAO RP2040 and QMK firmware.

Last updated 23 days ago

Hackpad

An airbus FCU (flight control unit) inspired macropad to improve workflows and convert your workspace into a virtual cockpit