@Pyae2014K

I had to redo my alarm clock’s case and plate in Fusion because the first version was a stl file not a step.

I redid my case and plate because it was a STL and not a STEP.

I made the firmware and uploaded all the files onto Github.

I redid my case and plate for the 2 time because after doing alarm clock’s design I got way better at 3D modeling, so I just did it.

I worked on my Case and Plate which was also pretty easy because the guide was so helpful.

I worked on my PCB and after doing the hackpad the PCB step has been pretty easy.

I finished my case and plate, and I am pretty proud of it because it looks way better than my first try and it probably fits better but I will have to wait and see.

Since the last version of my PCB was too big and I didn’t like it that much, so I remade it in like 3 hours because I am better at Ki Cad than my first time using it.

I tried to program the QMK firmware, but it kept on failing and I am sooo frustrated.

I finally after 6 and a half hours of designing i finally finished my Hackpad’s case and plate.

I started work on my case and had a really confusing time because I didn’t understand how Fusion 360 and Shapr3D worked so I had to both learn to use them and also make the case at the same time.

I finally finished my PCB after like 5 hours of mind numbingly confusing designing.

I finally finished the schematic and am start the pcb design which is so far been pretty good.

I am soo confused on how to get the MOUDLE-SEEEDUINO-XIAO symbol and I still don’t know how to do it.