Rejected yet again
- Revised 3D model to include magnets for the main board
- Uploaded the final assembly to the github repo
- Updated the README with pictures of the model, and wiring
- re-submitted for the grant.
First print failed due to error while exporting from fusion360. This was the second print, printed successfully
sent the cad file to the printer as a test print.
Made the gondola sliding system
Grant Rejected- updated github with:
- wire schematics, screenshots of it.
- CAD models, screenshots of it
- Firmware, (Untested, made by AI)
Making the gondola sliding system,
Added pulleys and tensioners, need to finish the gondola sliding system and the main gondola
Made the main structural frame of the board. Still need to add bearings, holes, rod holder mounting place, would likely only be possible after i have received parts as the sizes on the website are not accurate.
Remade the model so that the shells can be 3D printed.
Updated design yet again but this time made it in Fusion360 for more accuracy.
Updated the design- removed the aluminium frame to reduce cost, for ease of building and to remove the sizing issue i was facing.
Automatic Snakes and Ladders Bot using COREXY system, I have made the first blockout of the mechanism, it is heavily inspired by the bambulab P2S 3D Printer’s usage of smooth rods instead of a gondola that moves on the aluminium extrusion itself.
