@nicklogan1412

Today, I made a fusion assembly of the 3 parts needed for a wing structure for my aircraft. I also sent out Emails to 2 local colleges (Saint Louis University and Washington University) If they would 3D print these parts for me because i do not have a 3D printer. I also attempted for a 72nd time to get my BLDC motor to work with my ESC and Arduino Uno. I also ran a couple more servo tests with my ESP32 that will be inside of the Airframe. When I am able to get the BLDC Motor working, I will connect it to the ESP32 and integrate it into my Servo testing code so that I can run everything with the ESP32. Below is the code that is uploaded to my Arduino to run the motor. I have the ESC speed pin connected to Pin 9, and I have the ground and 5V pins plugged into the Arduino with the Lipo battery connected to the ESC. It has not worked and if you have any advice please help me! Thank you

Here is a image of the Airframe with the addition of another servo to control Yaw. Please ignore the mess on my desk lol!!

I finished my RGB LED hackpad! I dont and cannot get any PCB software, (sorry) and i cannot get the red or blue pins on the LED to work (is it really RGB then?). Im very sorry, i cannot afford another RGB led and all of my wires broke in the middle of making this. sorry