@izaanhussain

so so good newsss hehe i completd the build of vibedeckk its soo good evrything workss ahah i couldnt lape the soldering coz i dont have a proper place to record the soldering and i love my laptopp . will be shippingg todayyyy yayay

i have soldered all the components and evrything couldnt lapse it coz iam alone and dont have proper setup and one thing happened my c3 supermini got fried it doesnt work i have ordered one from my money i would take a month to arrive so i have used nodemcu12e which i had please accept it it works u can see the video it look soo cool

ESP32 Mochi is fullly completed and i have put the test firmware too with the firmware i have put 712 gifs of the real dasai mochi face. current firmware acts like gif player only. i have uploaded all the files and will submit for funding and good new is that i got 0 errors in DRC hehe. meet you after building the cute mochiiii!!

Iam working on my new small simple project ESP32 mochi which is the my version clone of the real Dasai Mochi , iam usine esp32 C3 supermini because of its size . iam making the custom PCB and will provide a test (working) code with some gifs to run . now i have completed the shematics and i have used connectors instead of thier footprints coz c3 orign=inal footprints are hard to find and iam bad at soldering i always damage the oled and the c3 thanks!

VibeDeck github has been imroved firmware has been added . the fin al rendeer image with the components has been added yeah do checkout. my excitement has been dying its 10 days since i started thiss

VibeDeck github has been imroved firmware has been added . the fin al rendeer image with the components has been added yeah do checkout. my excitement has been dying its 10 days since i started thiss

Wifi Death V1 fully complted with pcb enhanced new pcb files , gerber files are out on github with firmware. one thing for the reviewers due to the same folder name of the firmware files hackatime hours were added to my another project vibedeck . and i accidently added a diffrent unrelated project to this project (i dont know what to do ) yup thats all see you after the approvall!! EXCITED!!!!!!!!

Wifi Death V1 fully complted with pcb enhanced new pcb files , gerber files are out on github with firmware. one thing for the reviewers due to the same folder name of the firmware files hackatime hours were added to my another project vibedeck . and i accidently added a diffrent unrelated project to this project (i dont know what to do ) yup thats all see you after the approvall!! EXCITED!!!!!!!!

VibeDeck finally completed ig wrote the firmware uploaded the production and all other files . firmware didnt get recoreded in hackatine it got into a different project 😭😭. do check it out guyss

Wifi Death V1 completeddt!! (almost a bit firmware is remaining ) . PCB , gerber files evrything needed for prod is complted do ckeckouttt!!

Wifi Death V1 completeddt!! (almost a bit firmware is remaining ) . PCB , gerber files evrything needed for prod is complted do ckeckouttt!!

Today i completed the shematics of Wifi Death v1 and i assigned the footprints ,ran erc after fixing everything atlast i git 0 warning and 0 errors . Wifi death v1 is a simple wifi hacking/testing device with oled display and esp32 c3 super mini as brain. Next devlog ill complete the pcb and after that ill complete the firmware (untested) then will submit for funding.

Today i completed the shematics of Wifi Death v1 and i assigned the footprints ,ran erc after fixing everything atlast i git 0 warning and 0 errors . Wifi death v1 is a simple wifi hacking/testing device with oled display and esp32 c3 super mini as brain. Next devlog ill complete the pcb and after that ill complete the firmware (untested) then will submit for funding.

VibeDeck finally completed ig wrote the firmware uploaded the production and all other files . firmware didnt get recoreded in hackatine it got into a different project 😭😭. do check it out guyss

VibeDeck update i have removed the oled and the rotatory encoder feature i didnt wanna make it complex. added SK6812 MINI RGB. i have updated the CAD and PCB. This projects CAD is used and redesigned from the benGreenberg07s repository.

VibeDeck update i have removed the oled and the rotatory encoder feature i didnt wanna make it complex. added SK6812 MINI RGB. i have updated the CAD and PCB. This projects CAD is used and redesigned from the benGreenberg07s repository.

Today I finished the main PCB design and routing for VibeDeck.
I also started designing the enclosure in FreeCAD and made the top and bottom parts. The 9 key openings are already cut.
Still need to add the OLED, encoder and USB-C openings, then firmware, Gerbers and final documentation.

VibeDeck PCB routing completed The board has a 3×3 mechanical-key matrix, 9× 1N4148 diodes, XIAO RP2040, EC11 rotary encoder and a 0.91” OLED header.I also ran kicad’s drc and got 0 errors and 0 unconnected items. this is my first proper PCB design, so getting to this point feels pretty damn good lol.
Next is the case design ,manufacturing files and firmware.