🌟First protype for the triple-joint system for our pop-out arm. No actions designed yet but the framework has be set in place.🌟
Its DONE i have finnished all of the parts tho the 3d model has some small inconsistencies the measurements are correct i just failed to line it up properly. Thank you to anyone is has liked one of my posts i really appreciate it.
I finnished the phisical spinner for now at least because the system i choose for right this second is gear and chain but the bevel gears hit the gear so i have to reconfigure it. In doing that i added the pole for the spinner and made the hole wider so the chain could fit through it.
I continued work on the gear system and making sure they were all alined properly. I added the wheels and combined it all together. I also began work on the spinner and the way the power will be transfered from the motor to the spinner, if you have a suggestion on if it would be better as a chain drive or band or any other ideas out there.
I’ve been working on all the mechanics suck as the motors and gears to move the rotation and energy of them in the proper directions. Soon this project will be completed after a few more tweaks to the out side shell and then the last few thing for the spinner and wheels.
Stayed up for a 30 min cool down before bed and i worked on the gear that will turn the spinner.
I worked on more structural parts of the spinner frame as well as tunning up and putting the outer black edging on the body of the bot.
i got the main frames of the body parts, and i finished the screw hole peices that will help them connect together.
