Devlog 9

This was about 3 days of work, I did not have a lot of motivation to continue keep doing this however i was able to finally finish the ESC PCB. Please do not bully me about my via’s… I know that they are bad. That is one thing that I would like to work on when doing the flight controller. The copper pour that I did was only for GND. although this is very messy i hope to improve how i layout the flight controller because that is the next step. The size that i used was 40mm by 40mm. Although this is pretty big, I hope that it still is ok for the drone. Now its time to work on the flight controller, something that I am both excited about and scared, because now I have a set size that i can use. 40mm by 40mm… i hope that i can do this!