Today, i spent a massive amount of time just fixing the layout and the arrangement of my Macropad. There were a lot of random wires here and there and they were not in the right place. So i fixed those and removed the unimportant ones. Additionally, I have finished the basic design of the basic 3 key macropad, but ofcourse, i wanted to personalize it. so i added a rotary encoder switch which manages the volume.
I used the Design Rules Checker to find tracks touching the wrong pads and missing connections.
I also learned how to use both copper layers to route tracks.
besides the pcb layout, i worked on qmk firware, the software which tells the macropad what to do and how to respond to button presses. I learnt how to edit keyboard.json, keymap.c, rules.mk and stuff like that. I faced many issues and many ERRORS, so i spent a good amount of time figuring out how to get past them.
but after a lott of hardwork, i successfully built the firmware. this process taught me a lot, and I learnt how the configuration and the keymaps file fit together and also how to run a terminal.
If im being honest, this was pretty tiring, and drained a lot o my mental energy, but honestly, it was worth the effort.
Now, i need to check the remaining warnings and update the case to fit in the rotary encoder.
I faced challenges a lot of times throughout the process, and i took help from google, youtube, and chatgpt (in the worst case scenario). But I learned a lot from the process.
Comments 0
No comments yet. Be the first!
Sign in to join the conversation.