You are browsing as a guest. Sign up (or log in) to start making projects!

3h 54m 26s logged

Schematic and PCB Layout

Schematic

I found the parts in the Hackpad guide on JLCPCB, and instead of using the Xiao RP2040, I decided to go with the Waveshare ESP32-S3-Zero because it has Bluetooth capabilities and more pins.

From the kit I used:

  • 16x through-hole 1N4148 Diodes
  • 16x MX-Style switches
  • 2x EC11E Rotary encoders (with switch!)
  • 12x SK6812 MINI-E LEDs

I wired the buttons in a matrix (4 rows, 4 columns), put each EC11E on its own 3 pins, and added the SK6812 LEDs to the last remaining pin.

I was choosing between this and putting the EC11E switches in the matrix with a screen, but RGB LEDs are better than an OLED display.

Layout

The original 90x70 board was really cramped after laying everything out, so I ended up extending it to 95x75 for a little bit of extra space. I was trying to keep the board under 100x100 because I know things can be weird and more expensive with bigger board sizes.

My main issues were the space, or the lack thereof, but somehow after finessing the diodes and the LEDs, I fit everything just barely on the board. I also had to fix the LED footprint because it created a hole in the PCB underneath the LED instead of outlining on the silkscreen layer.

Next

I want to experiment with the silkscreen and put on some cool images, as well as finish routing the board.

0
23

Comments 0

No comments yet. Be the first!