WGM-Audio-mp3-player

So finally the project came alive to life thanks to Hackclub Stardance that they funded me i spent around 2-3hrs soldering the joints and checking functions. Just 2 mistakes I made was with my case alignment and fitting as the snap lid was a bit off so I used double tape to stick it to the main body and then the sockets ports size was a bit off so had to use my soldering iron to make some space but in a way that the structure looks good from outside then spent sanding the surface from outside due to the roughness caused by soldering iron and the off shape then after abt 30mins of sanding it went smooth and nice now all good and the project finally works audio is audible clearly. Thanks Hackclub once again for helping me to bring my project to life.

Spent a few hours changing the repo only to realize at end that wait the case design is totally off and the upper lid alignments needs to be changed also the text orientation how it will look when we snap the lid close . Spent a few mins then fixing the case issue then made few small additions to the repo also .

Now finally I referred to the repo of orhpeuspad by Qcoral then I used it to understand how to make a proper well aligned structured repo . Then I made a few small changes to the case of my device add some text and making an hole in the top lid of case. Finally finished cleanly with the repo with proper details BOM and the files with structures.

I finished designed the case for my mp3 player and then I worked on my repo by finishing the BOM and uploading all the files case pcb assets screenshots all work done for mp3 excited to get funded and make this dream come true irl in hardware

Mp3 player works for both sd card and pendrive upto 128gb finished the pcb designing now case design remains