So basically as we all know those who have a 3d printer might know this issue thought they may have an ams but still the filament gets tangled sometimes and ruins the print, alot of filament electricity and time gets wasted. So to avoid this I made an 3d printer filament untangler. So I studied the spool design for 1kg filament and made a cad model accordingly for any 1kg filament spool .
Hi so I made changes as my reviewer asked me. Made few design fixes for the small case accommodating the battery and type-c charging module then made dimensions check. Updated the repo as per the design changes I made and updated the design in repo also. Added more clear information in the repo for the build and design .
So I made an cool table lamp with boxes . I focused on making something that is useful for all rather than something not needed or much useful high tech stuff which I or anyone will rarely use. Kept it simple made the schematic first then the pcb then designed the case made the repo gathered the links of parts I needed finished the repo . Will polish my repo soon
So finally the project came alive to life thanks to Hackclub Stardance that they funded me i spent around 2-3hrs soldering the joints and checking functions. Just 2 mistakes I made was with my case alignment and fitting as the snap lid was a bit off so I used double tape to stick it to the main body and then the sockets ports size was a bit off so had to use my soldering iron to make some space but in a way that the structure looks good from outside then spent sanding the surface from outside due to the roughness caused by soldering iron and the off shape then after abt 30mins of sanding it went smooth and nice now all good and the project finally works audio is audible clearly. Thanks Hackclub once again for helping me to bring my project to life.
Spent a few hours changing the repo only to realize at end that wait the case design is totally off and the upper lid alignments needs to be changed also the text orientation how it will look when we snap the lid close . Spent a few mins then fixing the case issue then made few small additions to the repo also .
Now finally I referred to the repo of orhpeuspad by Qcoral then I used it to understand how to make a proper well aligned structured repo . Then I made a few small changes to the case of my device add some text and making an hole in the top lid of case. Finally finished cleanly with the repo with proper details BOM and the files with structures.
I finished designed the case for my mp3 player and then I worked on my repo by finishing the BOM and uploading all the files case pcb assets screenshots all work done for mp3 excited to get funded and make this dream come true irl in hardware
Mp3 player works for both sd card and pendrive upto 128gb finished the pcb designing now case design remains
Spent 15-20mins reading documents understanding how to finish my repo and now proceeding for making the QMK firmware
FINISHED designing the pcb and solved the issues finished making the case and pcb now learning to make firmware
Designed the pcb layout for the macropad as I am using the 6.0.11 version which is compatible for my 13 yo mac model so some libraries are outdated caused me some trouble searching modules so I just added connector and spaced them accordingly for the pins of microcontroller right now facing error with routing figuring it out
I am new and working on a custom 3 by 3 key hackpad with an oled display and by now I have designed the keys schematic . Now in the next phase I will be adding the display and microcontroller to the pcb it’s something kind of a new experience designing a pcb and its fun and hectic
