Sorry for the time I have not posted for. Actually I posted these in forge and now I transferred it to stardance and it is taking all the time together. So I can’t write seperate ones. However, I have the lapse recording of everything, so u can just see those. First 20 mins:
So I worked on the schematic of the whole keyboard and the wiring with the microcontroller. All the keys have their own diode and switch, so I used a matrix system to find the keys and also prevent ghost typing. https://lapse.hackclub.com/timelapse/7zI1hcPbiXJR
1 hour 2 mins:
I made the final touches up to the schematic like making it clean and neat. I also assigned footprints which took a lot of time. https://lapse.hackclub.com/timelapse/KHlYa4D3B5qR
1 hour 12 mins:
So I completed the PCB arrangement, and made it look neat. I added mounting holes arranged the keys, diodes and switches. I started firmware and use ZMK firmware for the macropad.
https://lapse.hackclub.com/timelapse/tDINjaCysHzD
1 hour :
So I worked on the firmware and boy it was hard. Firmware is new to me and I barely understood anything. There were errors popping up everywhere and fixing them felt frusturating (hope the spelling is right :). But I almost have it down only another error is lurking in Github. https://lapse.hackclub.com/timelapse/H2S4aKnhR8GX