V2 of the case (fluked it)
Cad Changes:
Changed the hole diameters to be 3.4mm which somehow fits perfectly, extended the height of the walls by 3mm and therefore also increased the depth of the nut inserts to account for that. Also added a cutout for the USB since it sat too high and increased the switch cutouts by 1mm on all sides so it sits at the lowest point.
Now the top plate sits flat on the board, and there is enough room for the plate to sit flush with the switches.
Next steps:
So I kind of only soldered the 2 outer pins on the OLED screen and forgot to do the inner 2 and I can’t access a soldering iron until after stardance ends, it just means that the next devlog (that will be about the firmware) wont include the screen.
Comments 0
No comments yet. Be the first!
Sign in to join the conversation.