V1 of the case
Cad changes:
Changed the bottom where the nuts screw onto the bolts to have an inset, so that when its sitting flat the nuts dont stick out of the base and make it sit unevenly. Also increased the size of the holes to 3.1mm because im going to sandwich them together.
THE PROBLEMS:
Firstly the 3.1mm is NOT enough for the screws to fit so next devlog im going to increase them to 3.3mm. Secondly as shown in the photo, the usb port on the microcontroller is too high and stops the lid from sitting flat down. It doesnt really matter anyway since the key cutouts are also too small so they need to be enlarged.
Comments 0
No comments yet. Be the first!
Sign in to join the conversation.