By
@nithish1201
Its a macropad which I will be using for streaming, shortcuts and a variety of things. Its my first time doing anything hardware so its a bit of a learning curve for me.
49m 10s logged
Well, seems i had the leds flipped 😂
anyway i fixed that, added their 3d models cuz why not, and i think im gonna make more changes to the case
1h 35m 8s logged
i think im done, ive set up the github repo, finished my readme and am ready for submission! fingers crossed.
1h 0m 33s logged
So i Finished up the 3d model then set up a basic file structure for the github repo and started installing firmware software namely qmk.
3h 31m 31s logged
Of course it had to happen. i got the spacing for the keys all wrong so i went back and wired it all together, then did a BUNCH more 3d modelling which took forever cause this is my first time.
50m 50s logged
So i was doing some 3d modellin on tinkercad before i realised that i had the orientation of the microcontroller wrong. welp. Took me forever to reroute evrything.
47m 26s logged
I finally finished my pcb and landed on a design which i think looks good and im proud of it!
3h 34m 3s logged
Ive made it horizntal and ik it doesnt look the bst right now but i trust i can fix that when i get to printing it out. i added all the 3d models which ws a pain btw. and currently working on getting it all wired up. I actively seek criticism and comments from more experienced peoplpe as this is my first time doiong antything like this and any advice wouold be much appreciated, Thank you!
1h 19m 45s logged
yay! things are looking good, arranged and wired these up, added a graphic design and fingers crossed all the wiring is right lmao
1h 36m 33s logged
Adding more parts and verifying everything’s wired fine.
