OMG IT’S FINALLY DONE
sorry for the lack of devlogs, I’ve been having some lapse issues.
BUT OMG
IT’S COMPLETE
IT’S REAL
(If you can’t tell I’m very happy rn)
to recap, I fumbled around with splitting the pcb, then I got strait to soldering.
I started with the bridging connections between the halves. I was going to add small wires between them, but the pcb ended up being small enough to just put a bunch of solder on. Definitely want to replace those with vias in the future lol
Then it was the diodes. These went pretty smoothly, not much to say.
Then I soldered the seeed, oled, and encoder. the seeed was surprisingly easy, but the other two were quite annoying because some of the bridging details are too low to fit the components, so I had to cut them off.
finally, all of the switches were put into the top shell and soldered onto the pcb.
I way undersized the bolt holes, and especially the heatset insert holes, so I had to shove them in with a soldering iron.
But at long last, it was complete, and it was beautiful
This devlog also took a while because I spent a bunch of time fixing the firmware even though i didnt need to. I works now though, and I’m happy
I’m just so happy right now :))))
Comments 0
No comments yet. Be the first!
Sign in to join the conversation.