Helloooo

So this is a collection of multiple days of work since I was too lazy to publish them. Since I hit almost 10 hours I decided to post this.

In these couple of project days I was able to do a lot of stuff that I wanted to do!!!

1. I fully integrated my project onto Obsidian. And let me tell you, Obsidian is the Goat. It is so easy to use and so comfortable. I was able to get the sketch done on it and I was also able to put all the components that I needed to but onto it as well!! Additionally the whiteboard and canvas feature really helped me. Using these features I mapped out the circuit of my project!
2. I chose all the components that I needed and bought everything that I needed. In total it cost me around ~2000 kgrz som which is about 25 dollars.
3. By the time the components arrive, I started the app. I am not good with building apps so I had to vibe code it. I am pretty proud with the design that I chose so its pretty good. However it still needs further testing.
4. I was able to draw the icon for the app and the face expressions for the pot itself.

There were multiple issues that I faced while doing this tho.

My first issue stems from the water source. My trivia was how I was going to get the water: combine it with the pot and make it sleek or make it a separate printable water bottle you can place on the ground? At the end I chose to do the water bottle method since this will allow me to store more water for future use and it will be less of a pain to print.

My second issue came when I was choosing which LED strip to buy. I was stuck between the purple ones and the COD ones. Although both are similar I did not like the Purple color that was radiating from the Purple strips. Because of that I just chose to do the COD ones.