Devlog!

Today i worked on some essential pieces of design for the LiteSky airframe!

I have created
1)A battery holder to stop it moving around and affecting weight in flight
2) A wing strut that will go between the pieces of depron foam to give it support and also that Clarck Y airfoil shape
3) A internal bulkhead this strengthens the inside of the cabin for landings and help everything stay connected.

Design bits:
You will notice how the wing strut and the bulkhead have cutouts in them this is to reduce the weight as much as possible. I had to be careful that i didnt weaken the integrity of the pieces so that they can complete what they are designed for.

The battery tray holder was especially designed for reusable cable ties to thread through and under the battery holder.
You may have to use 2 ties depending on battery size.
But the holder has a specific under channel to allow the tie to sit flush with the plastic and being allowed to be glued down inside the aircraft.