Devlog 1 - This is going to be a 10” mini rack pc case. I found no good options on the rest of the internet, they all either use a pico psu, or don’t support a pcie card while including a psu. I want something that supports a mini-itx motherboard, flex-atx psu, and a half height gpu.

So far I have the basics done like all the motherboard standoffs, an area for the psu, and a cutout for a 2 slot gpu. Although this will not work in many racks because it will stick out past the 222mm in between the rails.

Next I plan to add the rest of the back(a way to mount the psu, and something to hold the pcie card). Then I will make the front panel with the rack ears.

Sources:
General mini rack info: https://mini-rack.jeffgeerling.com/
Power supply dimensions: https://www.silverstonetek.com/en/tech-talk/10055
Motherboard dimensions: https://gitbook.curiouser.top/origin/hardwares.html