um i have done almost everything besides the case

• servos were breaking everything
  • so aparently even if you dont use a servo on pin 10 0r 9 the servo lobrary still disables it but i uses those for red and green so i will need to figure that out later
• all panels and the main board are soldered and wired
• controlls
  • when you click on the rotary encoder it changes what value you are changeing
    • white - white lights
    • red - red lights
    • green - green lights
    • blue - blue lights
    • yellow - servos (not working)
    • purple - turns on uv on main pannel