Today I worked on my Cad, The main thing that took way too long was the air vents, I made some 0.4in diameter holes and repeated them around the whole outer casing. I also added a place marker for where the aroma pad will be, I chose to put it in the center of the base so that when the fresh filtered air comes in and is pulled up, the scent naturally mixes. I also removed the place for the oled screen because I didnt need it anymore and fixed some small errors. The whole thing will be controlled online through esphome, So I’ll figure that out tommorow, Also these are the main parts
1)Esp32
2)Custom L289N motor Driver
3)DC Power
4)SPST
5)120mm Computer fan(2x)
6)Aroma Pads
7)M4 Heat Set Inserts and Screw

I also have to fix my cad to fit inserts because right now they are set at 4.1mm diameter holes, and I’ll work on my github