I did it! I designed the PCB for the pad, I will hopefully be finding a better name for this project soon, but here’s what I accomplished. I added two more RGB LEDs for better backlighting on the keys. I then imported all the footprints, came up with a general layout, and connected everything. Because of how I was doing my connections, I ended up with a “main rail”, where I had rails on both sides of the board, making it nearly impossible to cross. So I ended up having some fun routing around the main area and using some vias to go under/over other rails. Here’s how it turned out. Also, I changed the project image for now. (Pictures of front, back, and design)