You are browsing as a guest. Sign up (or log in) to start making projects!

9h 11m 56s logged

DEVLOG #51

I now have a full five-minute recording with peer data in both directions. RX1 received 263 suitable frames from RX4, and RX4 received 361 from RX1. Both still fall short of the required 600, and the time-window coverage failed too.

I fixed the host handling of out-of-order packets, which had previously stopped a recording. The completed pair run handled seven reordered packets without that earlier failure. I also installed the recovery improvements on all four receivers, though the deliberate Wi-Fi outage test is still pending.

A later firmware filters unsuitable peer layouts earlier, but captures were still expiring during pair preparation. The interesting catch was the timing model: the real scheduler uses 10 ms ticks, while earlier models assumed 1 ms. A send opportunity could look possible but be missed before the worker woke up.

The newest fix adds processing reserve and stricter readiness checks. It passes the offline expiry model, but still needs hardware validation.

Next: test the new candidate on hardware, then run a short peer pilot before repeating the full pair recording.

0
36

Comments 0

No comments yet. Be the first!