You are browsing as a guest. Sign up (or log in) to start making projects!

5h 31m 53s logged

DEVLOG #50

The shared firmware is now running on all four receivers, and I finally have a passed baseline recording. Across three minutes, every TX1-to-RX link reached all 173 valid analysis windows, above the required 156.

Getting there took another fix: the first pilot was missing the WLAN data filter and traffic generator used by the earlier firmware, so it barely collected useful CSI.

The peer links are still giving me trouble. I reproduced and fixed a timing race that ended their sessions too early. After installing that fix, both sessions stayed active during the short check, but peer captures were still expiring before being sent. The next pair recording was blocked, and I returned all receivers to TX-only operation.

I’ve now prepared another fix that separates waiting for a send slot from running out of peer quota. It passes the offline regression, but hasn’t been validated on hardware yet.

Next: validate the transport fix on hardware, then repeat the full baseline and two-way peer measurements.

0
45

Comments 0

No comments yet. Be the first!