You are browsing as a guest. Sign up (or log in) to start making projects!

9h 36m 32s logged

DEVLOG #49

I now have one shared firmware image for all four receivers. Each RX gets its identity, LED settings and measurement profile through configuration, which should make future changes much easier to maintain.

I also reworked Wi-Fi reconnection, peer scheduling and updates. The server and recorder now understand the new packet format, keeping device identity, timing and configuration changes attached to the raw CSI data. The shared image builds reproducibly and has passed its offline checks, but the hardware rollout and real measurements are still ahead.

Separately, RX4 finally has a confirmed boot on the earlier Gen02 firmware, with Wi-Fi and CSI running. One confusing detail: its old address was actually answering as RX3. That explains the later address mismatch, though it doesn’t prove what caused the original timeout.

The inconsistent file reads are still unexplained, so I’m keeping that issue open too.

Next: qualify the shared firmware on the receivers, then repeat the baseline and two-way peer measurements.

0
47

Comments 0

No comments yet. Be the first!