You are browsing as a guest. Sign up (or log in) to start making projects!

@Drake on BulletinOS

19m logged

made a case for the entire thing, you can basically just mount it pretty easily and throw everything inside should be a tight fit as I perfectly matched the dimensions

0
17

Comments 2

@Abracadabra3

You might have a hard time getting the electronics in the case like it is right now. I would recommend adding a small chamfer to help lead the electronics in and a slight bit of tolerances (.15 mm is recommended for a press fit in 3d printed parts). Nothing will be exactly the correct measurements, both the case and the electronics.

@Drake

Yeah you’re right I will add that, this was just a rough draft but thats a good idea