Cad V1.1 and the prototype!

Cad v1.1 is primarily focused on adding in the practical segments, mostly the payload bay (to be installed between the nose and wingbox) and battery bay (to be installed just aft of the wingbox.

The prototype, on the other hand, is rather less refined. at the moment all that has been printed is the rudderons, nose, and wingbox (though part of the tail is being printed as i write this). the problem is these parts are quite long, and my poor old printer has a z limit of 210mm, so that, along with constant print failures, has made assembly a long and painful process.

next devlog will be me putting the whole thing together (hopefully).