Today I had done the schematic.
It’s going to be a pretty interesting concept as the wiring is wild different to other matricies.

We need almost 120m of LED strips. And they are going to draw almost 2 000W. It’s going to be an electric kettle lol.
Because of that I have added two power cables to power the thing, as 220V is better for this. *laughs in geman.

I have started creating the schematic in DrawIO. First was the PSU along with the two heavy duty cables I’ve mentioned earlier. Then it’s going to WAGO connectors which will be our power distribution and then it’s going to be distributed to the LED power injection points.
Next I did a block diagram in it for the LED matrix, but it wasn’t really clear how to connect it up so I’ve hopped into tinkercad and did a small scale schematic with all of the right features.

Next up is:

• Doing drawings of the the LED strip placement and / adding the 2x4 supports as well as the PSUs
• Ask my brother if he can try to visualize it in blender
• Create instructions for building at outpost or at home lol