Finished the schematic for my PromptPad. It’s my second ever schematic after the practice schematic I made while navigating HackClub’s hackpad tutorial.

I have probably worked more than 30 minutes on the schematic but noticed I hadn’t kept the kicad-wakatime application running in the backround.

It was pretty fun learning about matrix wiring. I had some confusions about what ghosting actually looked like, but learning about the solution was pretty interesting.

I noticed that the other projects already have an OLED module in their schematic but I chose to follow the guide and use a generic 4 pin connector. I then downloaded a footprint for a 128x32 4 pin OLED which I will use for routing the PCB. I also wanted to add the SK6812 MINI-LEDs but I don’t seem to have any open pin for that.

Feedback would be much appreciated!!