Drafted a rough bill of materials, later finalized bom.csv, and added it to the project repository on GitHub. Simultaneously, debugged the code and created the player graphics. Next task: get the hardware grant, build it, take measurements, and fit it into an enclosure to be designed in Onshape. Simultaneously, check wiring, verify it, and then draft a PCB. Note: 1. After thoughtful recommendations, this project was unshipped from Macondo to ship it on Stardance, as Macondo is about to end. Journals made here after will reflect all my work on this project on Stardance. 2. It is taken care of that no double-dipping happens, or that there is no duplicate project that exists or is shipped on Macondo. 3. Have attached only some screenshots because the address was being revealed. 4. I have worked for 7 hours until now, but since the project was shifted from Macondo, it shows about 3 hrs.