Radio Survey Drone
Hardware- 1 Devlogs
- 15 Total hours
Drone that maps out radio throughout a certain given area. Co-project with @jotheexplorer123.
Hello!
I am facing issues with accessing the CAD files - Please make sure that the actual files are .step! In addition, your firmware is just 3 .gitkeep files. They don't contain anything! Please make sure you have the actual files. The same goes for all parts of your PCB. Under /naviation, you have 4 .py files, but all of them have 0 lines.
Once these changes are made, we will take another look, and if everything is good, we will approve! :D
Devlog 0: Radio Survey Drone
This project has been in the works for a really long time. I’ve been working on this project alongside @jotheexplorer123. We’ve been basing our design off a frame that we already have, adding hardware and changing the structure of the base. From the design portion, we’ve been laying out our hardware, finding ways to mount it, CAD’ing, and using iterative design simulations for an optimized payload frame. On the hardware side of things, we’ve been figuring out compatibility between parts, configuring Ardupilot, and porting Linux onto our microcontroller.
