Pathfinder project
Hardware
By
@NotALarp
- 1 Devlogs
- 1 Total hours
A pathfinder project with 4 buttons, 5 LEDs and an OLED display.
@NotALarp
on
Pathfinder project
57m 21s logged
PUMPING OUT MY PATHFINDER PROJECT: 😶🌫️
I created my pathfinder project for the one, the only hack club stardance and I used every port I could on the RP2040 as to not lose any capabilities I could’ve had. I started with the schematic, which was fairly easy. I started with the simple 3 LEDs and 3 buttons, but I saw how many ports on the microcontroller I was wasting, so I added 2 more LEDs, an extra button AND AN OLED SCREEN to finally finish my schematic and not waste anything. 👍
I moved onto the PCB and completed it fairly quickly, I curved the edges of the PCB a bit after moving my components to the layout below and routing them. Finally, I moved to the 3D viewer and spent ages finding and adding all the CAD files. And with that I finished today’s session.
Peace out ✌️🫡
NotALarp
