I hope to create a macropad and get my first experience developing working hardware. For the macropad, I want to create a casing that shows off the complexities of the PCB underneath. I also hope to add small designs to my PCB.
I made the knob! Then I tried to assign different colors in the Appearance section and realized I made everything one body. :( But it is ok because I think white against the colors of the pcb will look cool.
I am nearly finished with my case! I need to do the nob for the rotary encoder.
I am currently working on my case. I forgot to record a lot of it because I was so focused. Here is current progress.
I added silkscreens!
I just did my first routing! It was a challenge but a fun puzzle.
I built the rest of my schematic! I am unsure why I am still getting errors, though. Despite that, I think I made great progress for today! I am excited to do the next layout steps next.
Attempting to troubleshoot an error I am getting from my electrical signals checker
I finally figured out how to get labels working! KiCad is harder than I thought.
I was starting the base layout for my macropad! I am certainly a bit lost, but learning along the way!
