Argo is a smart system created to help archaeologists. It’s the first of its kind to be able to digitalize archaeological fragments via scanning, create 3D models of the pieces and categorize them systematically, doing all of this quickly and on-site.
3h 48m 50s logged
I’ve checked all the screws and bolts, for the BOM, though I found some mistakes due to the last minute changes that I made yesterday. Unfortunately I’ve already committed the laser cutter job :(
1h 51m logged
I’ve done the v.3 of the nesting file to match the wood sheets that I found in my local hardware shop
3h 53m 15s logged
I’ve added the linear motor to the conveyor, I’ve also modified the nesting and the printable files to match the modification
5h 6m 1s logged
I’ve organized all the printed parts on 15 different plates :) I’ve also done minor changes on the conveyor.
5h 42m 1s logged
I’m working on the nesting layout file. I’m gonna send it to my local fablab as soon as possible. I’ve also fixed some problems. Next steps are:
1)Create the 3d printing layout for every pieces,
2)Make a list of all the screws and bolts that I need (A LOT),
3) Buy everything and assemble it.
5h 56m 1s logged
The scanner module is almost ready for production
6h 4m 18s logged
I’ve made a lot of adjustments to the parts that carry Argo’s load. I’ve also started working on the scanner module.
7h 12m 55s logged
The structure of the Rover is ready!!
Next steps are:
3h 24m 31s logged
The majority of the conveyor is DONE!!
9h 29m 3s logged
Few parts missing!!
4h 26m 2s logged
Kinda there
4h 20m 23s logged
Still working on the conveyor
1h 44m 1s logged
I’m finally starting to see the light at the end of the tunnel.
5h 19m 54s logged
I HATE SolidWorks :(
1h 36m logged
Just a HUGE pillar!
2h 19m 1s logged
I’m working on Argo with @Pollo
.png)
