Key_Cap_Shulker_CAD
By
@Loibo_2
- 1 Devlogs
- 1 Total hours
Key Cap Shulker in CAD, 3d print model and stl file
Ship #1
@Loibo_2
on
Key_Cap_Shulker_CAD
I did this project to get better with CAD programs and used Onshape for this one. Had some problems with making the top half fit. (time working on the project ~12h, joint the hackclub while making it, so it did'nt tracked everything)
To build the shulker, you need to print a top and bottom half. I used PLA with small layer heights. You also need a mechanical key and some super glue. Just glue the bottom to the key and wait until the glue dries. Then simply pop the top in place and you're done :)
@Loibo_2
on
Key_Cap_Shulker_CAD
1h 2m 56s logged
I’ve been working on a shulker design inspired by Minecraft. When combined with a mechanical switch, it functions as a fidget toy. Hope you enjoy it! (time of making ~ 12h)
