You are browsing as a guest. Sign up (or log in) to start making projects!

YX-26 GREYWOLF PT-2

Hardware

By @GHOAST

  • 1 Devlogs
  • 2 Total hours

YX-26 GREYWOLF PT-2 is the Second prototype of the project family YX-26 GREYWOLF, being 2.64-meter, ~6.5 kg Blended Wing-Body (BWB) unmanned aircraft designed from scratch in Autodesk Fusion 360. Built as a high-speed, stealth-inspired lifting-body prototype powered by an Electric Ducted Fan (EDF), PT-2 features complex surface-lofted panel geometry engineered for low drag, high vortex-lift maneuvers, and maximum internal volume for avionics and propulsion.

Source
Open comments for this post

@GHOAST on YX-26 GREYWOLF PT-2

2h 9m 2s logged

MAKING THE FUSELAGE AND NOSE’s Skin panels

Imported in the hand drawn Blueprints, adjusted the scale according to the goal perimeters,
Started off sketching the upper and side outlines of the UAV ,
then moved to sketching the CHINES of the nose, then Made the cross sectional sketch for the Airframe rib that connects the fuselage and the nose,
then lofted the nose cone, then sketched and lofted the lower part of the nose, then moved to the Intakes and side of the fuselage,
First of all sketched the outer outlines of the Intakes and the side fuselage, then lofted to check out the product shape, After analyzing the first look, I decided to introduce some horizontal curves in the sides to induce some required curvature,
Then re-lofted the sides, and got the perfect shape,
After that Made the side skin panels, and after making the Side skin panels,
I made the starting lips of the Intakes,
And for now its the most current Work done

0
1
18

Delete project?

Are you sure you want to permanently delete this project? This action cannot be undone.

All devlogs, followers, and associated data will be removed.

Followers

Loading…