I'm making this board, which is extremely customizable and is used to help old people learn the ways of technology. It also has built-in macro keys, an attachable rage-bait sensor that gives advice and cools you down, and a bunch of other stuff I plan to add.
Hey guys its been a great journey, But this is the final devlog for this project! Im quite sure some or at least one of you might have rly liked the project, but overall, thank you for being with me, through out the journey, Its been a great experience making this project! Cyall BYE!!!!!
Hello guys! So, how is your day going? 
I realized that frequent devlogs might be confusing or annoying, so I set a limit for myself; Cant post a devlog unless I have 1 and a half hours logged. As you can see, this one has ~2 hr logged. So I can post this.
So what I did:
)
<—– hover your cursor on this sticker
where the actual frame wouldn’t fit in the shell
)So thank y’all if you read all this 
, And pls do give suggestions. Always happy to improve 
So guys! You all know I’ve been offline for a bunch of days, and for those who have been with me and supporting me ( @mersecske ) I have disappointed y’all 
. But! I have been grinding, as you can see, this devlog is 6 hours!
So what I did all these days:
)Welp, that’s it! Thank you if you’ve read all this, and please lmk any suggestions, always happy to improve!
As of today I made an awesome addition, an built in screen, so the next time your gaming and lose a match then slam your desk the screen turns on and shows a powerful message, like “Patience is a virtue” or sumin like that.
I’m also planning to add a speaker so it can talk to you, but lets see how that goes?
So all these days I’ve been grinding, 5 mins a day, and now that exam week is over, I can come back to the project and work properly
What I have achieved in these few days:
This is gonna be a longer-than-usual devlog cuz it’s been updated over a period of time, not all at once
Also, this cooler I’m working on is like kinda rudimentary uses wires instead of PCBs, but I think PCBs are overkill for the cooler.
The frame for the keyboard part isn’t going so well, but shoutout @mersecske for helping me!
Overall, I’m thinking of adding another gimongus addition to the keyboard and cooler set, and a magnetic built-in mouse. Like, you click a button, the bare mouse PCB comes out, then you snap off the parts of the mouse from the keyboard (or cooler haven’t decided yet), and then you assemble it in 5 mins; it’s a niche feature, but maybe it could help while travelling?
Who knows? LMK what y’all think abt this idea, Cyall byeeeeeeeee! 
As of today, I completed the following things :
Lowk today was kinda productive; also made a fire edit on the rec below. The 3D model looks better in Onshape than Tinkercad.
Pls do help me out in the comments; the DRC errors are quite annoying. I think there is another way to fix them, so I left them, but if you know anything, do let me know abt it, always looking for improvements.
Also, one final thing: I’ll probably be reducing the amount of time I work on this project, cuz I got some other stuff going around and won’t be completely free until the end of this month.
Cyall, bye homies
#Devlog #9
As of today, I completed the following tasks :
Things to do tmrw:
)Today was comparatively better than tmrw (cuz ik how it’s gonna be, i’m lowk cooked 
and now the sticker isn’t showing up 
). As always, I’d love some feedback, comments on the timelapse, and the work, I’m always looking for things to improve. Bye Cyall
As of today, completed;
Quite an exhilarating day actually, although a difficult part was finished, the thing felt too repetive and strained my hand a lot, but I worked for 1 hr then ended the timelapse. My goal is to to work everyday for only an hour, Because think any session that has 4 hrs of work burns me out, leaving me tired for at least an hour and a half(Which i use by doomscrolling). Anyways that’s it for today, as always I would hear yall’s suggestions, I’d love to know what I can improve 
Today, I guess I could say that I have completed half of the PCB designing stage. I used my recently found knowledge about matrices and implemented them for the columns and rows, then immediately messed up, so I fixed up the columns part, then left the rows part for tmrw, as I can only work for 1Hr a day without firing up and losing all productivity (I’m not lazy, just sick ).
Tmrw ima fix the rows part (Which I messed up) and maybe move on to 3D designing, Pls do leave comments, I would love how you guys might react to or give suggestions to my project/devlogs.
Hola, mi amigo! I looked through my PCB design, then realized “This isn’t going to work.” So I used my brain, then started over with the basic format, where each key should be.
The improvements I made today:
Devlog #4
As of today, I have completed my basic positions for the keys, it was quite confusing, yet I pushed through, after this everything should be smooth sailing, this was quite challenging, but who doesnt love a challenge? if you have any suggestions, please look at my timelapse, and help me out
completed the schematic of the YashBoard. although this devlog only shows 16 min of work, this timelapse is my actual work… hope you all like my project.
Well, I think I almost completed the schematic, it was quite hard, but I’m pushing through it. Someone buy me a 3000$ PC, my laptop is lagging
This is awesome! I’ve made a mascot for my keyboard!
I started off my first major project. Wish me best of luck guys, ill keep you updated.
.jpg)