finished the y-axis movement parts
lowk speed ran and made a basic pulley system based heatset press
finished making the pcb, took me 4 hrs which Is Insane
finally finished the schematics for the board, need to do the pcb design. this Is lowk the longest I’ve spent on designing schematics (3h)
did like the frame and one part
made the base of both the arms, the follower and leader will have like 90% similar parts. designed teh base In such a way that It can be mounted onto the edge of a desk using c clamps
lowk speedran tf outta fusion. my fastest fusion session yet
worked on the readme, bom and wiring
finished the arm design
arm parts are done, only the gripper mechanism Is to be built, I’ve also added a bearing balls for smoother movement between base mount and the base top parts
made the base of the turntable mechanism and made the arm mount where the arm Is attached to a servo, and rotates while resting the load on the top part of the base
added the readme and bom.csv
did the schematics, designed the pcb and routed everything
made the pcb and figured out the bom
did wiring In figma, and updated the readme
made the schematic for the fc
finished the 3d design
made base and coxa of the quadruped
finished the arachnoid
made the coxa (part 1 of 3) part of the leg
Loading more…