Heatset Inserts Working; Fixing Faulty Motor Power Connections; Internal Fan Power Connectors

I verified that the servo cover works, and it’s much much better than the last version. The tolerances are much better this time, leading to less stress on the gears. The same amount of turning uses around 100mA compared to 300mA before, almost reaching it’s limit without any load.

Some motor power connectors disconnected, so I found it with a multimeter and added hot glue to some connectors to secure them.

I soldered the fan power things inside the PCB, but realized that the JST connectors I’m using are different from the fans. I might have to make a sort of adapter or something by crimping more wires.

And the heatset inserts finally work after some tweaking, before the inserts would get misaligned when put in, now with a aligning lip thing it can be slotted in and melted in more accurately.