Devlog 2 - MiniPad

• built the case on fusion, and guess what. i did lapse the first part of the case like v1, but forgot v2 cuz i left for a late night snakc and forgot to rerecord

• its all on onshape so you can see

the case

• 102.38 x 96.90mm, 16.6mm tall closed
• 1.5mm plate, 14mm switch cutouts on 19.05mm pitch
• pcb sits on four bosses 10mm up, leaving 7.5mm under the board for the reverse mounted leds and the xiao
• m3 heatsets drop into the bosses from the top
• usb-c slot in the side wall, the only overhang in the print
• fillets on the outside corners and chamfers on the top and bottom edges so it doesnt feel like a printed box

minipad (i gave it a name)

• renamed all the kicad files, gerbers, qmk firmware, and repo

restructured the repo to match the ship criteria. everything you need to build one is in production/ now: gerbers, both case steps, the prebuilt uf2. also made a single assembly step with the case and board in it