Working on the wiring. I had to first figure out exactly WHAT and HOW i would wire this. This is a very basic setup. Basically there is going to be a XT60 pigtail that i got of of hoverboard. You can see it next to my pencil. that will connect to the power bank. Into a fuse. the positive and negative will then flow move down into the sideboards (Salvaged from the hoverboard) and then a buck converter converting that 36V battery down into a usable 5V power for the razzberry pi and Arduino. Im itching to get these boards flashed so i can get into the fun stuff. But first i have to design that hip connection before i can get to excited. Im afraid when i split the power into 2 seperate rails i CANT just get away with using these butt connectors because there is WAY to much copper to fit into there so i will have to solder. And you know from my previous devlog that that is not pretty.