This is much stronger than the old version! After a long 4 hours i managed to direct the force (25lbs) To the metal bracket on the bottom. 25 pounds is going to be around the weight of the robot. And that’s overshooting it a lot. With this amount of stability i might even be able to ride it 🥹✌️ This design will also allow for a much easier way to add panels later on. As you can see in the 3rd picture the frame is much closer to the shape of the robot that i can snap the panels straight onto the frame. I also did some research and i found out that i can use triangular infill that will make these parts stronger while using less material.